This applet monitors various temperature, frequency and fan sources in your kicker panel.
Make sure you have enabled a supported kernel module.
supported thermal sources:
- the Linux ACPI Thermal Zone driver. The corresponding kernel module is called thermal.
- the thermal sources of the Linux ACPI driver for the IBM ThinkPad laptops. The corresponding kernel module is called ibm-acpi.
- the IBM Hard Drive Active Protection System (HDAPS) driver. The corresponding kernel module is called hdaps.
- the Omnibook Configuration Tools & Patches. The corresponding kernel module is called omnibook.
- the iBook G4 CPU and GPU thermal zones. It may work on other Apple machines as well (please let me know).
- the thermal sensors available through hwmon (I2C, lm_sensors, ...).
- the CPU thermal sensor of the i8k kernel driver for Dell Inspiron and Latitude notebooks.
- the GPU thermal sensors of nvidia-settings (provided by the nVidia GPU card driver tools)
- the termal sensors provided by hddtemp daemon (make sure hddtemp runs on 127.0.0.1 port 7634 before kima starts)
supported frequency sources:
- the Linux kernel /proc/cpuinfo interface
- the Linux kernel cpufreq subsystem
supported fan sources:
- the fan sensors available through hwmon (I2C, lm_sensors, ...).
- the fan sources of the Linux ACPI driver for the IBM ThinkPad laptops. The corresponding kernel module is called ibm-acpi.
- the fan sources of the i8k kernel driver for Dell Inspiron and Latitude notebooks.
- CPU usage source
- uptime source that displays the current system uptime
- battery source that displays the current state of charge of your batteries
- cpufreqd control module to switch cpufreqd profiles via cpufreqd remote interface
grab a appropriate package for your distribution or the sources below.
using the source:
./configure --prefix=$(kde-config --prefix)
build the sources
install the applet (with appropriate rights)
su -c 'make install'
finally add the applet to your KDE panel (RMB on kicker).
9 years ago
- CPU usage source added
- russian translation added
- thread wakeups minimized which should lead to a better powertop result
- crash fix: prevent i18n calls from within threads (it seems i18n isn't thread safe)
- the 0.7.3 tag was inconsistent to the released tar.gz so we decided to release 0.7.3.1
- improvements regarding the dbus error handling
- XNVCtrl support fixed
- small autoconf/automake script improvements
- more robust battery source in case of libhal/dbus errors
- since Kima 0.7.2 was already tagged we jump to 0.7.3 the changeog lists the never released 0.7.2 though
- battery source added that displays the current state of charge of your batteries through libhal
- nvidia thermal source: optional configure switch added to query libXNVCtrl.a instead of nvidia-settings
- updated admin directory that supports automake 1.10
- swedish, turkish and indonesian translation added (thanks to Oskar Ellström, UÄŸur í‡etin and Donnie S Bhayangkara)
- translation fixes
- processes started by kicker does not exit correctly because of kimas' use of QProcess. KProcess fixes the problem
- uptime source added
- initial source scanning parallelized
- spanish translation added
- hungary translation added
- german translation fixes
- hddtemp source bugfix, in case reading from network failed
- preferences bugfix, an enabled source was not displayed on kicker
- cursor fixed if one drags a source and clicks right mouse button
- encoding of the degree sign is now UTF8
- support for moving the sources via drag and drop added
- support for hddtemp daemon added (http://www.guzu.net/linux/hddtemp.php)
- german translation added
- repainting of the sources improved
visit http://kima.sourceforge.net/#changelog for reading the full changelog