ATI Overclocking Utility X32

System Software

Source (link to git-repo or to original if based on someone elses unmodified work): Add the source-code for this project on opencode.net

1
5.0
Description:

Overclocking utility for ATI video card, 32 bit executable.

-Catalyst 9.3+ is required (for libatiadlxx.so)
-It works with 4xxx, 3xxx series card others have not been confirmed. Mobility version seem to not have OverDrive implemented and there probably won't work, at least until it is implemented in the driver.
-The gui should be pretty self explanatory, but for the fan if left uncheck it keeps the "automatic" setting, otherwise it goes to manual mode set at the defined percentage
-Use wisely, e.g. you probably shouldn't turn off the fan and overclock everything to the maximum
-Since I modified the ADL SDK, and the license doesn't allow me to distribute the source, and I didn't want to figure out if I could publish under the GPL system library exception I am just posting executable at this time.
-Thanks to storma for the icon and phoronix forum members for testing the app
Last changelog:

11 years ago

1.0.5
-Change to use built-in button box in dialogs, which should show locale translation
-Added a new setting to change the internal refresh time which was set before at 2 second by default

1.0.4
-Added a kde system monitor (ksysguard) compliant daemon. To monitor locally use 127.0.0.1 since the standard ksysguard does not support multiple daemon per host name. To monitor remote machines use my modification of the ksysguard application under GPL also on kde apps, http://www.kde-apps.org/content/show.php/System+Monitor+2?content=110181, and deploy/run atioc on all your machines you would like GPU to be monitored.
-Added settings for the daemon to change the port and binding interface setting, setting are applied at next restart of atioc
-Now when the gpu reports that fan monitoring is not supported it will be greyed out in the interface, this will stops all the error message being printed out if starting from CLI

1.0.3

-Fixed a bug that caused an error "cannot set overdrive level" with certain card. This could affect any card series since it was due to an incompatibility with certain video card bios.

1.0.2

-Added a save setting option to allow restoring setting on applicaton startup, FYI the settings file is in $HOME/.config/atioc/atioc.conf
-Fix an issue that the app needed to be closed before doing a logout on kde otherwise kde would report the logout was aborted by the app

1.0.1

This should fix the issue with pre 4xxx series cards and underclocking.

19 comments
Comments/Ratings

Please login or register to add a comment or rating

skew

11 years ago

is there any utility to check the result?
ccc - can't, because i have mobility radeon hd2600

Report

C

sabby

11 years ago

Do you mean verifying that the settings were changed correctly? If so you can use aticonfig to verify that some of the setting were taking into account correctly, but not all since for example voltage info is not supported in aticonfig cli

Report

skew

11 years ago

Thanks, but
"aticonfig --od-getclocks
ERROR - ATI Overdrive(TM) is not supported on the Default Adapter - ATI Mobility Radeon HD 2600"
I think it doesn't change any clocks or voltage, unfortunately.
Ati overclocking utility based on "ATI Overdrive(TM)"?

Report

C

sabby

11 years ago

Yes this software use the overdrive module of the ADL_SDK. As far as I know it is not supported on mobility gpu, therefore this software won't do anything. Unless AMD enables support in future driver the mobility GPU...

Report

skew

10 years ago

With a great pleasure i discovered support for "ATI Overdrive(TM)" in my HD2600 Mobility with fglrx 8.721-100310a-097159c-ati (catalyst 10.4 beta), maybe some earlier versions. And under(over)clocking/undervolting works pretty well...
I like this app! :)

Report

jihemd

11 years ago

seems to work fine for me :
- mandriva 2009.0 kde 3.5
- Gainward Radeon 4850 overclocked edition
- Catalyst 9.6

thx

Report

charlie2

11 years ago

Will you add underclocking in the future? This HD 3850 won't go below its default speed in this app.

Report

C

sabby

11 years ago

give the 1.0.1 a try see if this allows lower value on the slider for you

Report

C

sabby

11 years ago

Could you post your catalyst version so I can update the info page that it is was confirmed working for 3xxx series card.

Report

C

sabby

11 years ago

There should already be underclocking in this software alread. However, I had no confirmation before that series 3xxx card were working. Can you post which Catalyst version you are using? You should be able to underclock down to your idle speed. You could put a screenshot of the overdrive/info tab so I can have a look.

Report

charlie2

11 years ago

It does not appear I can send a screen shot through kde-apps.org.

Info tab:
ATI Radeon HD 3850
Clock 670
Memory 830
Voltage 1200
fan% 9
GPU temp 58
GPU activity 0

overdrive tab (sliders at default)
clock 670
mem 680
voltage 1200

Report

C

sabby

11 years ago

And what are the min/max for each slider? What was your catalyst version by the way? Nice to see that it does seem to work with a 3xxx series card. I actually saw no reason for it not too work for card supported by catalyst 9.4+ but nobody had a chance to test with it.

Report

charlie2

11 years ago

Catalyst 9.6

gpu 670-720
mem 830-880
volt 1200-1254
fan 0-100

Report

C

sabby

11 years ago

FYI, idle speed on my 4830 is report as 160/250

Report

C

sabby

11 years ago

I see, I was taking the low end information from the idle speed of the card since I didn't see the need to go below idle speed because on my card below idle speed is too low and hangs. However, perhaps series 3xxx of card doesn't support idle speed and idle speed which is perf level 0 is just reported as the beginning of the peak range. In any case, in next version I will put the low end of the sliders to the low value reported by the card which should fix this issue for series 3xxx card, and series 4xxx card can just be careful about going to low.

Report

charlie2

11 years ago

I meant on the overdrive tab

mem 830 in other words the settings are all at the defaults and cannot go any lower.

Report

Lole

11 years ago

Works with the open driver of ubuntu?

Report

C

sabby

11 years ago

If by open drivers you mean radeon/radeonhd then no, it requires catalyst 9.3+ which is available in jaunty repository under the name xorg-driver-fglrx.

Report

Lole

11 years ago

ok, thanks!

Report

11 years ago

1.0.5
-Change to use built-in button box in dialogs, which should show locale translation
-Added a new setting to change the internal refresh time which was set before at 2 second by default

1.0.4
-Added a kde system monitor (ksysguard) compliant daemon. To monitor locally use 127.0.0.1 since the standard ksysguard does not support multiple daemon per host name. To monitor remote machines use my modification of the ksysguard application under GPL also on kde apps, http://www.kde-apps.org/content/show.php/System+Monitor+2?content=110181, and deploy/run atioc on all your machines you would like GPU to be monitored.
-Added settings for the daemon to change the port and binding interface setting, setting are applied at next restart of atioc
-Now when the gpu reports that fan monitoring is not supported it will be greyed out in the interface, this will stops all the error message being printed out if starting from CLI

1.0.3

-Fixed a bug that caused an error "cannot set overdrive level" with certain card. This could affect any card series since it was due to an incompatibility with certain video card bios.

1.0.2

-Added a save setting option to allow restoring setting on applicaton startup, FYI the settings file is in $HOME/.config/atioc/atioc.conf
-Fix an issue that the app needed to be closed before doing a logout on kde otherwise kde would report the logout was aborted by the app

1.0.1

This should fix the issue with pre 4xxx series cards and underclocking.

12345678910

0 comments
 Comments

Please login or register to add a comment

Be the first to comment
jihemd
Jul 13 2009
File (click to download) Version Description PackagetypeArchitectureRelease Channel Downloads Date Filesize DL OCS-Install MD5SUM
*Needs pling-store or ocs-url to install things
product-maker
sabby
Pling
0 Affiliates

Support-Box

Become a Supporter of "ATI Overclocking Utility X32" and similar System Software via a monthly donation of
  • $0.99
  • $2
  • $5
  • $10
  • $
    Enter a free Amount
ATI Overclocking Utility X32 is part of Libre Apps, Games and Add-ons, which is supported by the following people:
More System Software from sabby:
product
product
Other System Software:
product
product
product
product
product
product
Details
license
version
1.0.5
updated Nov 11 2009
added Jun 24 2009
downloads 24h
1
mediaviews 24h 0
pageviews 24h 1
Report Misuse Report SPAM
System Tags app software