Hamachi - RPM package

Network

Source (link to git-repo or to original if based on someone elses unmodified work): Add the source-code for this project on opencode.net

0
Score 50.0%
Description:

Hamachi is a zero-configuration virtual private networking application.

In other words Hamachi is a program that allows you to arrange multiple computers into their own secure network just as if they were connected by a physical network cable.

Hamachi is fast, secure and simple. Its core version is also free.
Last changelog:

13 years ago

Change log for Hamachi/Linux client.
Started with version 0.9.9.9-8

== 0.9.9.9-20 ==

* Fixed a bug causing the daemon to segfault in the event of
some peer going offline.

== 0.9.9.9-17 ==

* Fixed link layer framing of de-tunneled IP multicast packets.
Previously destination address was incorrectly set to host's
MAC instead of 01:00:5e:xx:xx:xx.

== 0.9.9.9-16 ==

* Fixed a bug in a tunneling code that under certain conditions
caused daemon to die with SIGABRT when transferring large
amounts of data.

== 0.9.9.9-15 ==

* Fixed a bug causing the daemon to behave erratically under certain
conditions over slow/lossy links

* Modified hamachi-init to set an access mask for private key to 0400
and to 0444 for public key

== 0.9.9.9-14 ==

* Fixed a bug that caused Hamachi daemon to terminate unexpectedly
when more than one 'hamachi login' commands were issued in a rapid
succession.

== 0.9.9.9-13 ==

* Added support for tunneling routed packets, ie packets that are not
destined to peer's 5.x.x.x address. This is *very* powerful feature.

Consider for example two separate LANs both connected to the I-net.
One LAN is 10.1.1.0/24, another - 10.2.2.0/24 and their default
gateways are running Hamachi clients with 5.1.1.1 and 5.2.2.2 IPs
respectively.

Adding the following routes -

ip route 10.2.2.0/24 via 5.2.2.2 dev ham 0 (on LAN1 gateway)
ip route 10.1.1.0/24 via 5.1.1.1 dev ham 0 (on LAN2 gateway)

will enable LAN-to-LAN communications via Hamachi tunnel that exists
between the gateways.

== 0.9.9.9-12 ==

* Modified command-line portion of Hamachi to cope gracefully with
redirects. v11 was errorneously treatin redirects as login failures
and produced confusing console message.

== 0.9.9.9-11 ==

* Added support for 'redirect' message, which is required to connect
to the next-gen Hamachi backend servers

== 0.9.9.9-10 ==

* Increased acceted size of network passwords from 63 to 255 characters

* Added 'hamachi evict' command

* Added rudimental shaping of p2p traffic. Both TX and RX UDP transmission
rates can now be capped. Define the following values in ~/.hamachi/config

TxRate
RxRate

This caps are applied to tunneled IPv4 traffic only, and they are applied
globally (ie not on per-tunnel basis). For example -

TxRate 8192

will restrict outbound packet rate to 8 KB/s.

== 0.9.9.9-9 ==

* this release was skipped

== 0.9.9.9-8 ==

* Added an option of keep-aliving tunnels. When enabled, it will cause
Hamachi to send out small UDP packet over the tunnel if there was no
outbound traffic for a specified number of seconds. Default value is
90 seconds.

To modify the value add the following line into ~/.hamachi/config:

KeepAlive 123

where 123 is an idle timeout in seconds. Minimum allowed values is 10.

To disable tunnel keep-alives, set KeepAlive to 0.

* Rebuilt -pentium package as previous version (0.9.9.9-7) was statically
linked against non-pentium libcrypto library.


C

eniac

13 years ago

Please, write a comment. Is package works properly?

Report

scummos

11 years ago

No, it does not...

it just generates a few files in my root filesystem:

linux-xkc5:/ # ls
bin dev home LICENSE.openssh lost+found mnt README srv tuncfg
boot etc lib LICENSE.openssl Makefile opt root sys usr
CHANGES hamachi LICENSE LICENSE.tuncfg media proc sbin tmp var


I dunno what they are doing there ^^

Good luck...

Best regreads

scummos

Report

13 years ago

Change log for Hamachi/Linux client.
Started with version 0.9.9.9-8

== 0.9.9.9-20 ==

* Fixed a bug causing the daemon to segfault in the event of
some peer going offline.

== 0.9.9.9-17 ==

* Fixed link layer framing of de-tunneled IP multicast packets.
Previously destination address was incorrectly set to host's
MAC instead of 01:00:5e:xx:xx:xx.

== 0.9.9.9-16 ==

* Fixed a bug in a tunneling code that under certain conditions
caused daemon to die with SIGABRT when transferring large
amounts of data.

== 0.9.9.9-15 ==

* Fixed a bug causing the daemon to behave erratically under certain
conditions over slow/lossy links

* Modified hamachi-init to set an access mask for private key to 0400
and to 0444 for public key

== 0.9.9.9-14 ==

* Fixed a bug that caused Hamachi daemon to terminate unexpectedly
when more than one 'hamachi login' commands were issued in a rapid
succession.

== 0.9.9.9-13 ==

* Added support for tunneling routed packets, ie packets that are not
destined to peer's 5.x.x.x address. This is *very* powerful feature.

Consider for example two separate LANs both connected to the I-net.
One LAN is 10.1.1.0/24, another - 10.2.2.0/24 and their default
gateways are running Hamachi clients with 5.1.1.1 and 5.2.2.2 IPs
respectively.

Adding the following routes -

ip route 10.2.2.0/24 via 5.2.2.2 dev ham 0 (on LAN1 gateway)
ip route 10.1.1.0/24 via 5.1.1.1 dev ham 0 (on LAN2 gateway)

will enable LAN-to-LAN communications via Hamachi tunnel that exists
between the gateways.

== 0.9.9.9-12 ==

* Modified command-line portion of Hamachi to cope gracefully with
redirects. v11 was errorneously treatin redirects as login failures
and produced confusing console message.

== 0.9.9.9-11 ==

* Added support for 'redirect' message, which is required to connect
to the next-gen Hamachi backend servers

== 0.9.9.9-10 ==

* Increased acceted size of network passwords from 63 to 255 characters

* Added 'hamachi evict' command

* Added rudimental shaping of p2p traffic. Both TX and RX UDP transmission
rates can now be capped. Define the following values in ~/.hamachi/config

TxRate
RxRate

This caps are applied to tunneled IPv4 traffic only, and they are applied
globally (ie not on per-tunnel basis). For example -

TxRate 8192

will restrict outbound packet rate to 8 KB/s.

== 0.9.9.9-9 ==

* this release was skipped

== 0.9.9.9-8 ==

* Added an option of keep-aliving tunnels. When enabled, it will cause
Hamachi to send out small UDP packet over the tunnel if there was no
outbound traffic for a specified number of seconds. Default value is
90 seconds.

To modify the value add the following line into ~/.hamachi/config:

KeepAlive 123

where 123 is an idle timeout in seconds. Minimum allowed values is 10.

To disable tunnel keep-alives, set KeepAlive to 0.

* Rebuilt -pentium package as previous version (0.9.9.9-7) was statically
linked against non-pentium libcrypto library.


12345678910
product-maker Count: 4 Rating: 5.0
File (click to download) Version Description PackagetypeArchitectureRelease Channel Downloads Date Filesize DL OCS-Install
Pling
*Needs ocs-url or ocs-store to install things
Details
license
version
0.9.9.9
updated Jul 04 2006
added Jul 03 2006
downloads today
0
page views today 2
System Tags app software